I have a leaking window on my 1978 Elvestrom 38, does anybody know where you can buy new rubbers? The windows were made by N. C. BJERG who i understand are no longer in business.

FYI I am based in the UK.

Many Thanks

Jason

Have You checked Berg WHO was reestablished sometime afte r 2002

Have You checked Berg WHO was reestablished sometime afte r 2002

Hi Bjarne,
Many Thanks for your reply, i was unable to find Berg WHO but i have found some of the seals are sold by Halberg Rassy spares.
Regards
Jason

Hello Jason, I have similar problem on my 38. It’s mainly on the small opening windows. So far i have been able to seal the smaller opening windows by cutting a small grove from the outside and apply a thin layer of Black sikaflex using masking tape to avoid a mess. If you are able to find the seals for the small opening windows at HR spares, I would be very thankful for a link. My understanding from previous discussions on this has always been the seals for the opening windows can’t be replaced as they are assembled with pressure on a special tool at the point of manufacturing, and this can’t be repaired, unless DIY’ed as I have been forced to do. The seals for the large window frames screwed in place from the inside should still be available and replaceable.

Below a link to the company that took over some of the production from N.C. Bjerg

http://www.ertec.dk/spare-parts/

Hello Henrik,
Please find below the link to the HR spares web site that shows which seals are available, I have bought 10m of the outside seal to see if it stops the leak.
http://shop.hallberg-rassy.com/contents/en-us/d172.html
I have also made enquirers here in the UK and i can have seals made from silicone but they are expensive as the minimum order is 30m approx £400.

Hi Jason,

Did you have any lucky with resealing? I’ve noticed mine are also dripping a bit.

Hi William, the Halberg Rassey spares worked well and stopped my leaks. I have replaced the seals on a saloon window and the heads. Best wishes Jason